201HH Planer, 7.5HP 1PH 230V
- Helical cutterhead with knife inserts provides smoother, quieter cutting and finer finish than conventional systems
- Cast iron 1300 lb. construction for solid performance without vibration
- 2 feed speeds - 20/30 fpm - accommodates rough and fine finish work
- Segmented infeed roller with sectional chipbreaker allows multiple board planing
- Roller bearing-mounted feed rollers for long life
- Adjustable bed rollers allow smooth feeding of rough or finished workpieces
- Oversized cast iron table travels on 2 large lead screws for heavy duty support
- Dust chute with 5" port for dust collection
- Standard Equipment:
- Dust collection port
| Motor Phase | 1 |
| Infeed Roller Diameter (In.) | 3 |
| Cutterhead Diameter (In.) | 3-1/4 |
| Recommended Circuit Size (Amps.) | 50 |
| Maximum Depth of Cut (In.) | 3/16 |
| Maximum Planing Width (In.) | 22 |
| Motor Voltage (V.) | 230 Only |
| Column Diameter (In.) | 2-1/2 |
| Feed Rate (FPM) | 20/30 |
| Table Size (LxW)(In.) | 32-1/4 x 24 |
| Dust Collection Minimum CFM Required (CFM) | 900 |
| Number of Speeds | 2 |
| Knife Size (LxWxT) | 15 x 15 x 2.5 |
| Number of Knives | 150 Four-Sided Inserts |
| Segmented Infeed Roller Diameter (In.) | 3 |
| Maximum Height of Rollers Parallel to Tabletop (In.) | 0.05 |
| Bed Rollers Adjustable from Front | 2 |
| Type of Cutterhead | Helical |
| Style (Type) | Planer |
| Outfeed Roller Diameter (In.) | 3 |
| Maximum Planing Thickness (In.) | 9-1/4 |
| Table Support | 2 Column |
| Motor Power (HP) | 7-1/2 |
| Minimum Planing Length (In.) | 10 |
| Cutterhead Speed (RPM) | 4,800 |
| Dust Port Outside Diameter (In.) | 5 |
There are no reviews yet
| Manufacturer warranty | ||
| 5 Year | ||
| Warranty details | ||
|
|
||
